- Made by BURKHARDT+WEBER.
- Maximum quality for optimal concentricity, axial eccentricity and repositioning accuracy.
- Layered structure with intermediate adjustments.
- Large custom-made bearings with ultimate precision.
- Particularly high tilting and tangential moments due to low table design and generously dimensioned axial roller bearings and holding brakes for optimum machining performance and excellent geometric results.
- For pallet loads over 12,000 kg, all tables have hydrostatic axial and radial bearings.
- Powerful torque drives up to 650 rpm (MCT series).
- Up to 4,000 kg in turning operation and 7,000 kg in milling operation (MCT series).
- Integrated balancing software and unbalance monitoring (MCT series).
- Elaborate cooling of drive and main bearings.
- Optional rotary/tilting table for simultaneous 5-axis machining.
- Made by BURKHARDT+WEBER.
- Very high quality thanks to tight tolerances for axial eccentricity, flatness and position.
- Special surfaces possible.
- All pallets have hardened guide and contact surfaces.
- Pallet loads from 1,500 kg to 20,000 kg.
MCX, MCT and MCµ series
- Linear roller guides of the highest quality.
- Over-dimensioned several times over for long-term accuracy.
- Sizes 55 and 65.
- Load distribution with large surface area thanks to the large number of guide carriages.
- Large guide widths for more stability.
- For particularly high precision requirements, guide and contact surfaces are refiled by hand in some cases.
MCR series
- Extra-wide sliding guides with extremely low surface pressures.
- Best damping characteristics and durability.
- Very rugged, laser-hardened.
- Generous dimensioning without compromising acceleration or feed force.
- High rigidity for maximum accuracy.
- Directly driven with powerful servo motors.
- Tensioned rack-and-pinion drive for large moving masses.
- Maximum-resolution, thermally decoupled scales.
- Measuring sensor directly adjacent to the input point.
- Rapid traversing speeds and feed rates up to 65,000 mm/min.
- Optimised jerk limitation of all elements of the drive assembly (servo motor, ball screw or rack-and-pinion drive, bearing, etc.) for long service life.
- Made by BURKHARDT+WEBER.
- Powerful and robustly dimensioned.
- Assembled by highly experienced employees.
- Strictest quality controls.
- 24-hour load spectrum on BW test stand with programmable counter-loads.
- Variety of powerful gear spindles with up to 80 kW and 3,600 Nm and speeds up to 10,000 rpm.
- Fast, powerful pivoting spindles.
- Quill spindle with diameter 160 mm and stroke up to 1,000 mm are available for deep-set machining operations.
- High-mass design.
- Thermally symmetrical construction.
- Large guide length and width.
- Thermally inert and vibration damping thanks to design as a cast part.
- Made by BURKHARDT+WEBER.
- Modular, highly flexible tool magazines – peerless and market-leading worldwide.
- Maximum capacity of 608 tools.
- 5 highly dynamic NC axes.
- Traversing speeds up to 200 m/min.
- Changeable weight up to 75 kg, tilting moment up to 150 Nm.
- Tool lengths up to 1200 mm.
- Boring bar diameters up to 900 mm.
- Automatic determination of the tool tilting moment and weight.
- Process-optimised loading and unloading, application-oriented pre-storage and comprehensive tool management for maximum convenience.
- Stability and geometry form the basis for long-term accuracy.
- Robustly dimensioned, high-mass design.
- Robust dimensioning and FEM-optimised structures guarantee optimum rigidity.
- Virtually free of sagging due to high and wide studs under the guides.
- Welded steel construction, same thermal expansion as guide rails.
- Smart Panel: equipped with high-quality 24" full HD multi-touch panel.
- Innovative design, intuitive operation and straightforward user interface.
- Innovative machine-specific operating areas.
- Modern operating elements and additional convenience functions make operation very user-friendly.
- Simplified data entry, job planning and machine control.